Manufacturer off-Grade Ammeter Plastic Case Flame Retardant PC/ABS Resin/Granule
Basic Info
Model No.: PC-YY
Product Description
Model NO.: PC-YY Usage: General Plastics, Engineering Plastics Plastic Forming Method: Casting Plastic Packaging Material: Plastic Application: Used for All Kinds of Plastic Products Type: ABS+PC Plastic Pellets Certificate: ISO, CE Payment: T/T L/C Trademark: Eminent Origin: China Material: Acrylonitrile-Butadiene-Styrene Copolymers/ABS Plastic Properties After Heated: Thermoplastic Plastics Color: White Tensile Strength: 43MPa Name: PC/ABS Granules PMMA: ABS Sample Offered: Free Mfr: 30g/10min Specification: iso, sgs HS Code: 3903110000
Polycarbonate granules/PC resin
Description
PC usually is made into products by injection molding, extrusion, coining, blow molding, thermoforming, printing, Adhesive, coating and machining, the most important processing method is injection molding.
PC Specifications
1.PC Polycarbonate granule
2.Free sample
3.Injection grade,extrusion grade,blow film grade
4.Widely used in engineering
PC- Polycarbonate
Specific gravity: 1.18-1.20g/cm3
Moulding shrinkage: 0.5-0.8%
Moulding temperature: 230-320C
Drying condition: 8 hours under 110-120C
Usage temperature: -60~120C
PC Usage
1. PC is made into large bulb shade, protective glass, the right and left eyepiece tube of optical instruments. Also, it is used as the transparent materials in plane.
2. PC is good insulation, made into insulated connector, coil frame, tube socket, insulating sleeve, telephone housing and parts, miner's lamp battery shell. Also, it is used to make fine parts of communication equipment, such as CD-ROM, telephone, computer, video recorder, telephone switches, signal relay. The PC film is used for capacitors, insulation foreskin, recorder, color video tape. Etc
3. Machinery and equipment-PC is suitable for gear, rack, worm, bearings, cams, bolts, crank, ratchet, also suitable for machinery and equipment housings, covers and frames.
4. PC can be made into cap, tube, bottle and dental equipment, drug containers and surgical instruments. Even be used as an artificial kidney, artificial lung and other artificial organs.
5. For architectural, PC can be made into Double wall hollow bars, glass of greenhouse. For textile industry, PC is suitable for making bobbin, textile machine bearing. For daily, PC is good material can be made into tableware, toys and models.
Character
This series have high impact resistance and stiffness, good dimensional stability
good heat resistance.
PC Serious and Specification
PC Properties:
High impact strength, shape stable, colourless, transparent, easy dying, electric insulation, corrosion resistance, wear resistance are good. However, poor self-lubricating, with tendency to stress cracking, high temperature easily hydrolyzed, poor compatibility with other resins. PC is suitable for making instrument small parts, insulating and transparent parts and impact-resistant parts.
PC usually is made into products by injection molding, extrusion, coining, blow molding, thermoforming, printing, adhesive, coating and machining, the most important processing method is injection molding.
Contact us if you need more details on Flame Retardant Polycarbonate in High Quality. We are ready to answer your questions on packaging, logistics, certification or any other aspects about PC ABS Granule、Recycled Polycarbonate Resin. If these products fail to match your need, please contact us and we would like to provide relevant information.
Polycarbonate granules/PC resin
Description
PC usually is made into products by injection molding, extrusion, coining, blow molding, thermoforming, printing, Adhesive, coating and machining, the most important processing method is injection molding.
PC Specifications
1.PC Polycarbonate granule
2.Free sample
3.Injection grade,extrusion grade,blow film grade
4.Widely used in engineering
PC- Polycarbonate
Specific gravity: 1.18-1.20g/cm3
Moulding shrinkage: 0.5-0.8%
Moulding temperature: 230-320C
Drying condition: 8 hours under 110-120C
Usage temperature: -60~120C
PC Usage
1. PC is made into large bulb shade, protective glass, the right and left eyepiece tube of optical instruments. Also, it is used as the transparent materials in plane.
2. PC is good insulation, made into insulated connector, coil frame, tube socket, insulating sleeve, telephone housing and parts, miner's lamp battery shell. Also, it is used to make fine parts of communication equipment, such as CD-ROM, telephone, computer, video recorder, telephone switches, signal relay. The PC film is used for capacitors, insulation foreskin, recorder, color video tape. Etc
3. Machinery and equipment-PC is suitable for gear, rack, worm, bearings, cams, bolts, crank, ratchet, also suitable for machinery and equipment housings, covers and frames.
4. PC can be made into cap, tube, bottle and dental equipment, drug containers and surgical instruments. Even be used as an artificial kidney, artificial lung and other artificial organs.
5. For architectural, PC can be made into Double wall hollow bars, glass of greenhouse. For textile industry, PC is suitable for making bobbin, textile machine bearing. For daily, PC is good material can be made into tableware, toys and models.
Character
This series have high impact resistance and stiffness, good dimensional stability
good heat resistance.
PC Serious and Specification
Test Project | Test Methods | Unit | Typical Values |
Tensile Stress | GB/T1040-92 | Mpa | ≥50 |
Flexural Stress | GB/T9341-2000 | Mpa | ≥100 |
Flexural Modulus | GB/T9341-2000 | Mpa | ≥1500 |
Notched Impact Strength | GB/T1043-93 | KJ/m2 | ≥20 |
Elongation At Break | GB/T1040-92 | % | ≥100 |
Heat Distortion Temperature | GB/T1634-2004 | °C | 110-120 |
MFR | GB/T3682-2000 | g/10min | 8-18 |
Oxygen Index (Vertical Burning) | GB/T2408-1996 | 4mm | ≥28 |
Testing Condition | 23±2°C, 50±5%RH |
Properties | Test method | unit | PC-110 |
Tensile strength | ASTM D-638 | kg/cm2 | 630 |
Bending strength | ASTM D-790 | kg/cm2 | 920 |
IZOD impact strength | ASTM D-256 | kg-cm/cm | 87 |
Softening point | ASTM D-1525 | °C | 150 |
MFI | ASTM D-1238 | g/10min | 10.0 |
Note: GF--Glassfiber, FR--Flame Retardant, ST--Super Tough, HR--Heat Resistance, WR--Wear Resisatnce, CF-Carbon Fiber, MF-Mineral Fiber | ||||
Product Division | Typical grade | Filler % | FR UL-94 | Characteristics |
PC | Glassfiber reinforced grade (GF) | 10G2 | 10 | HB | High strength, Heat resistance |
10G6 | 30 | HB | |||
Flame retardant grade (FR) | 1010F | 0 | V0 | Flame retardance | |
K30B | 0 | V0 | |||
K30BN | 0 | V0 | |||
FR & GF | 10G2F | 10 | V0 | Flame retardance, High rigidity, Heat resistance | |
10G6F | 30 | V0 | |||
super toughness (ST) | 1010F-T5 | 0 | HB | Super toughness, Cold resistance | |
1010F-T6 | 0 | HB | |||
Special | 1010UV | 0 | HB | Weatherability, anti-UV | |
1010LG | 0 | HB | Low gloss | ||
Opetical fiber Using | 1010OF | 0 | V2 | Heat resistance |
PC/ABS | General grade (GP) | A2200HF | 0 | HB | High flowability |
1210MP | 0 | HB | Plating | ||
1210UV | 0 | HB | Weatherability, anti-UV | ||
GF | 12G2 | 10 | HB | High strength, Heat resistance | |
12G6 | 30 | HB | |||
FR | A2200FR | 0 | V0 | Flame retardance, High flowability | |
1210F | 0 | V0,5VA | Flame retardance, High flowability, High impact | ||
1210FGN | 0 | V0 | Non-halogen, Flame retardance, High flowability | ||
FR & GF | 12G2F | 10 | V0 | Flame retardance, High rigidity, Heat resistance | |
12G6F | 30 | V0 | |||
super toughness (ST) | A2200HF-T5 | 0 | HB | Super toughness, Low temperature resistance | |
A2200HF-T6 | 0 | HB | |||
A2200HF-T7 | 0 | HB | |||
A2200HF-T8 | 0 | HB | |||
PC/PBT | GP | 1310 | 0 | HB | Super toughness at low temperature |
ST | 1030 | 0 | HB | Super toughness at low temperature, good surface | |
FR | 1310F | 0 | V0 | Flame retardance,Super toughness at low temperature | |
PC/PET | GP | 1410 | 0 | HB | Super toughness at low temperature |
GF | 1410G4 | 20 | HB | Glass fiber reinforced 10%,20%,30%, Super toughness at low temperature | |
MF | 1410M4 | 20 | HB | Mineral fiber reinforced 10%,20%,30%, Super toughness at low temperature | |
FR | 1410F | 0 | V0 | Flame retardance,Super toughness at low temperature |
High impact strength, shape stable, colourless, transparent, easy dying, electric insulation, corrosion resistance, wear resistance are good. However, poor self-lubricating, with tendency to stress cracking, high temperature easily hydrolyzed, poor compatibility with other resins. PC is suitable for making instrument small parts, insulating and transparent parts and impact-resistant parts.
PC usually is made into products by injection molding, extrusion, coining, blow molding, thermoforming, printing, adhesive, coating and machining, the most important processing method is injection molding.
Contact us if you need more details on Flame Retardant Polycarbonate in High Quality. We are ready to answer your questions on packaging, logistics, certification or any other aspects about PC ABS Granule、Recycled Polycarbonate Resin. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Plastic Materials
Premium Related Products
Other Products
Hot Products
Briquetted Coal-Based Activated CarbonHot Herbicide Glyphosate 95%Tc 75%Wdg 41%SL 62%SLCAS No. 52-68-6 Insecticide Trichlorfon 97%Tc, 80%Wp, 90%Wp TrichlorfonHeat Transfer Fluid, Htf 320High Quality Caustic Soda Flakes 99%Gum Rosin Ester Deep Yellow N GradeHigh Quality Purified Terephthalic Acid Pta 99% Industry Grade/Feed GradeFully/Semi Refined Paraffin Wax Manufacturer 58/60Adipic Acid 99.7%High Quality Cocamide Dea Cosmetic Grade 6501High Quality Urea NPK MPO DAP Fertilizers 99%Glycerin USP GradeNPKLABSA/Linear Alkyl Benzene Sulfonic AcidFully Refined Paraffin Wax 58-60#CMC/Carboxyl Methyl Cellulose